Leave Your Message
llnav06
Coating Materials Automatic Production Line
A full closed-loop production system tailored for the fine chemical industry.
INQUIRE NOW
+
llnav06
Electronic Ceramic Automatic Production Line
Built to Industry 4.0 standards, this is a fully automatic production line.
INQUIRE NOW
+
1-planetary-mixing-automatic-production(1)
Planetary Mixing Automatic Production Line For Battery Slurry
Specially designed for the preparation of lithium battery cathode slurry.
INQUIRE NOW
+
llnav06
Sulfide Solid Electrolytes Production Line
It features a highly sealed, explosion-proof and corrosion-resistant design with full inert gas protection.
INQUIRE NOW
+
1-battery-anode-materials-production-line(1)
Battery Anode Materials Production Line
LONGLY takes nano bead milling technology as its core to deliver narrow particle size distribution.
INQUIRE NOW
+
1-battery-cathode-materials-production-line(1)
Battery Cathode Materials Production Line
We have developed highly automated full-process production lines for various cathode materials.
INQUIRE NOW
+

About Longly

Longly Intelligence was founded in 2002 and is a national-level specialized, refined, distinctive, and innovative "Little Giant" enterprise that integrates R&D, production, sales, and service of intelligent equipment. For 24 years, the company has focused on developing and applying technologies for storage, mixing, grinding, dispersion, drying, and conveying in the field of high-end nano-new materials, dedicated to providing customers with a one-stop manufacturing platform combining smart individual units and intelligent factories. It currently serves over 40 industries—including new energy, new materials, pharmaceuticals, food, cosmetics, semiconductors, inks, paints, and coatings—serving more than 4,000 enterprises, delivering over 510 turnkey system solutions and a cumulative total of more than 40,000 units of equipment.

Read more
llnav12

Dongguan, Guangdong Headquarters - LONGLY Group

llnav13

Dongguan, Guangdong R&D Base – LONGLY Technology Park

llnav14

Suizhou, Hubei Production Base – Langling Industrial Park

2002

Founded in

270+

Patent

40,000+

Number of units sold

520+

Turnkey Project

60+

Countries of sale

 Our Histony ABOUT US

2002
The company has officially been established, positioning itself as a high-tech enterprise specializing in premium-grade grinding and dispersion equipment in China
2006
Export to German aircraft paint enterprise
Introduced German mechanical seal technology
Passed CE certification to obtain EU import and export rights
2010
Certified in accordance with ISO 9001 quality management system
Launched LSM-A Series micron bead mill

Read more
12 (1)

Dongguan, Guangdong Headquarters 

12 (2)

R&D Base – LONGLY Technology Park

Our History-Smart Factory

Our History-Smart Factory

2025 - 2026

LONGLY Suizhou (Hubei) Phase II Production Base Officially Commences Full Operation

 Advantages ABOUT US

With a R&D team of over 150 members and more than 270 patents, the products undergo iterative updates every two years, achieving performance and production capacity improvements of 30–50%.
200 sets of high-end machining centers, with 80% of core components manufactured domestically.
Multiple inspection procedures with hierarchical quality control.
Product stability ranks first in China.
The first company to develop a grinding solution with a resolution of 30–50 nanometers.
The world's first vertical and horizontal bead mill developed.

Read more
9c866125-cbe3-4874-87b2-8a3a84263250

Bead mill processing area

44219c30-75a4-4cb4-a9fb-10b5bd8a74f3

Emulsifying machine processing area

11040dc6-fab0-4a6a-95d7-de4a36200a48

Zirconium bead production workshop

200+

Monthly production equipment

200+

High-end processing equipment

80%

Of core components are manufactured in-house

Global Footprint ABOUT US

Guangdong LONGLY Technology Park → Hubei LONGLY Industrial Park
Germany, France, the United States, Brazil, Japan, South Korea, India, Vietnam, Indonesia, Malaysia, Turkey, Pakistan, Morocco

Read more
Let smart equipment become the competitiveness of your enterprise

Let smart equipment become the competitiveness of your enterprise

40000+

Equipment Served Worldwide

4000+

Global Customers

Within 24 hours

Respond to customer needs

Partners ABOUT US

With a robust partner ecosystem spanning over 40 industries and 4,000+ global clients, Longly Intelligent stands as a pivotal connector in the high-end nanomaterial equipment sector. Founded in 2002 and recognized as a National-Level SRDI "Little Giant" enterprise, we leverage 24 years of expertise to bridge R&D, production, and smart manufacturing solutions for diverse markets—from new energy and semiconductors to pharmaceuticals, cosmetics, and advanced coatings.

Read more
pexels-karola-g-7876783

 4,000+ global clients

4000+

Serving Customers

40+

Application Industries

 Corporate Culture ABOUT US

To be a global leader in the nanomaterial processing industry.
Brand Slogan:  Built with LONGLY,Built to Lead.
Corporate Mission: Let smart equipment boost your enterprise’s competitiveness.
Values: Innovation & Efficiency, Excellence & Perseverance, Dedication & Accountability, Integrity & Trust, Collaboration & Win-Win.

Read more
Built on Talent, Forged by Craftsmanship

Built on Talent, Forged by Craftsmanship

120+

After-sales Team

800+

Employees

Corporate Honors ABOUT US

To date, the company has obtained more than 270 patents, including invention patents and utility model patents. Longly Group focuses on intelligent equipment with key development areas covering energy saving and consumption reduction, low-carbon efficiency and green intelligent manufacturing, driving sustainable development across the industry.

Read more
EU ATEX Explosion Protection Certification

EU ATEX Explosion-proof Certification

EU CE Certificate of Conformity

CE Certificate of Conformity

Suizhou, Hubei Production Base – Langling Industrial Park

270+

Invention and Utility Model Patents

Guangdong Top 500

Manufacturing Enterprises

Get support now

Get a Quote
Building 3, No. 40, Luxi 2nd Road, Liaobu Town, Dongguan City, Guangdong Province, China.
0%

Picking the right open cycle spray dryer for your global sourcing isn’t just about size and cost — there’s a lot more to think about. You want a system that really matches your product, utilities, your production environment, and the support network you’ll need. Things like powder moisture, inlet temp, feed viscosity, and target particle size shouldn’t be an afterthought when setting your initial specs. For example, a centrifugal spray dryer might be perfect if you're handling high volumes, but you’ve got to pay attention to things like wheel speed and atomization control — they’re crucial and need careful evaluation.

In the real world, your sourcing team should dig into the details — review technical drawings, check out material certificates, performance data, and the factory’s inspection records. Don’t hesitate to ask how the supplier proves their drying efficiency under actual feed conditions, not just in the lab. It’s a good idea to run a trial using material that’s representative of your process — not just water — because that test can reveal issues like wall buildup, unstable feeding, or difficulties in recovering the powder. Sometimes, what looks good on paper doesn’t hold up in practice.

And when sourcing globally, reliability is everything. Make sure you look into the availability of spare parts, remote support options, how they handle commissioning, and operator training. Also, double-check that their electrical specs and documentation match what's needed at your facility. Getting an independent test or a qualified engineering review can really help confirm you’re making the right choice, but honestly, nothing beats direct communication with the supplier. Those tiny details can make or break your project.

When comparing options, think beyond just the initial price. A thorough evaluation considers the total lifecycle costs — energy consumption, cleaning time, ease of maintenance, and downtime — these can really influence your final decision. A lot of buyers get hung up on the dryer’s size, but that’s a mistake. The entire system — atomizer, cyclone, bag filter, controls, feed system — all work together, and the best choice isn’t necessarily the biggest machine. It’s the one that performs reliably, has clear records, and offers good support along the way. Keep in mind, some uncertainty is unavoidable, so being honest about potential risks and staying flexible is smart.

All in all, selecting the right dryer is about balancing performance, compliance, and future growth. Sometimes, it’s about making a smart, well-informed choice rather than just going for the biggest or cheapest option. The goal? Find a system that runs smoothly, consistently, and can grow with you — not just today, but down the road.

How to Choose a Spray Dryer Open Cycle for Global Sourcing?

Define Open-Cycle Spray Dryers by Airflow, Feed Type, and Solvent Limits

How to Choose a Spray Dryer Open Cycle for Global Sourcing?

Define Open-Cycle Spray Dryers by Airflow, Feed Type, and Solvent Limits

An open-cycle spray dryer draws fresh air, heats it, and exhausts it after drying. The airflow pattern matters. Co-current airflow protects heat-sensitive products because droplets meet the hottest air first. Counter-current airflow can improve thermal efficiency, but it raises exposure risk. The U.S. Food and Drug Administration’s Process Validation guidance stresses controlling critical process parameters, including inlet temperature, outlet temperature, feed rate, and atomization conditions.

Feed type narrows the equipment choice. Solutions usually atomize easily. Suspensions require careful nozzle selection and agitation. Emulsions may need wider passages to reduce blockage. A 2023 technical review in Drying Technology reported that droplet size strongly affects drying time, powder flow, and residual moisture. Small droplets dry quickly. They may also create more dust.

Solvent limits require stricter screening. ICH Q3C(R8) generally permits a 5,000 ppm concentration limit for Class 3 residual solvents under Option 1. This value applies to finished-product residues, not directly to dryer exhaust. For flammable solvents, ATEX guidance requires assessing ignition sources, ventilation, and hazardous zones. Airflow alone cannot prove safety. It is an incomplete shortcut.

Request solvent compatibility data, exhaust concentration testing, and validated cleaning procedures. Supplier documents can look precise while hiding feed variability. A pilot run remains valuable, especially when viscosity changes during production.

Match Capacity to Evaporation Loads from 5 to 10,000 kg Water per Hour

How to Choose a Spray Dryer Open Cycle for Global Sourcing?

Match the dryer to evaporation load, not feed weight. A 5 kg/h water load suits a Pilot Spray Dryer, while 10,000 kg/h requires industrial-scale air heating, separation, and exhaust handling. At 40% feed solids, evaporating 5,000 kg of water requires about 8,333 kg of feed hourly. This calculation is often missed.

Start with moisture balance and seasonal conditions. The U.S. Department of Energy reports that process heating represents about 61% of manufacturing energy use in the United States. Therefore, inlet-air temperature, humidity, and heat recovery deserve early attention. ASHRAE Handbook psychrometric methods help estimate air volume and enthalpy under different climates. Open-cycle systems draw ambient air, heat it, and discharge exhaust. A humid coastal site may need more air than a dry inland site.

Leave practical margin. I usually test a 10–20% capacity reserve for fouling, feed variation, and future demand, but this is not universal. A clean spreadsheet can still mislead. The European Commission’s Food, Drink and Milk Industries BREF emphasizes monitoring energy, dust, and exhaust conditions during process design. Ask suppliers to prove evaporation performance with representative feed, not water alone. Observe wall deposits, outlet temperature stability, cleaning time, and powder recovery. Small pilot trials reveal uncomfortable details. They also prevent expensive oversizing.

How to Choose a Spray Dryer Open Cycle for Global Sourcing?

Match the dryer to the required water evaporation load, which can range from laboratory-scale duties of about 5 kg/h to large industrial duties of 10,000 kg/h. The logarithmic scale makes the full capacity range easier to compare.

Compare Inlet Temperatures of 150–250°C with Outlet Control at 60–100°C

Choosing an open-cycle spray dryer for global sourcing requires more than comparing catalog temperatures. Inlet air between 150°C and 250°C can improve evaporation, but it also increases thermal stress. Outlet control is usually more revealing. A stable 60–100°C outlet temperature helps protect powder quality and supports repeatable moisture levels.

In practical trials, a 190°C inlet with an 80°C outlet may outperform a 230°C setting. The hotter option can shorten drying time, yet it may create darker particles, surface cracks, or unwanted aroma loss.

Feed concentration, droplet size, airflow, and ambient humidity also change the result. Do not judge temperature alone. Ask suppliers for test data using a comparable feed material.

Check how quickly the outlet temperature responds when feed rate changes. That detail matters during production.

Tips: Request a written control range, not only a maximum temperature. Confirm sensor locations and calibration records. Review powder moisture, bulk density, and particle size after testing. A 60°C outlet may suit sensitive materials, while a 100°C outlet can support faster drying. The best setting is rarely fixed. It may need adjustment between regions. This is easy to underestimate. Also, open-cycle systems release exhaust air, so filtration, ventilation, and local compliance requirements deserve technical review before purchase.

Evaluate Powder Recovery Rates Above 95% Using Cyclones and Bag Filters

Choosing an open-cycle spray dryer starts with powder recovery, not only drying capacity. A cyclone removes heavier droplets first, while a bag filter captures the fine fraction that escapes. Properly matched systems can exceed 95% recovery under stable operating conditions. The European Commission’s 2019 BAT Reference Document for Food, Drink and Milk Industries identifies cyclones and fabric filters as effective particulate-control technologies. Actual performance still depends on powder density, moisture, temperature, and particle size.

Small particles are difficult.

The U.S. EPA’s AP-42, Section 6.8, reports that spray-drying emissions vary significantly with feed composition and collection equipment. This supports requesting measured outlet-loss data, rather than accepting a generic efficiency claim. Ask suppliers to provide recovery results from comparable powders, including cyclone pressure drop and bag-filter air-to-cloth ratio. A 95% figure may describe one test run, not long-term production.

When comparing a Spray Dryer Quotation, check whether recovery includes fines returned to the product stream. Inspect the proposed discharge points, filter cleaning cycle, and sampling method. In practice, sticky powders can blind filter bags and reduce performance within hours. I would also request a pilot trial using your actual feed. Laboratory confidence can be misleading. A slightly larger filter area may cost more, but it can protect recovery during humidity changes and variable feed rates.

How to Choose a Spray Dryer Open Cycle for Global Sourcing? - Evaluate Powder Recovery Rates Above 95% Using Cyclones and Bag Filters

Powder Category Typical Median Particle Size (µm) Recommended Open-Cycle Separation Arrangement Indicative Cyclone Recovery Bag Filter Capture of Cyclone Exhaust Expected Overall Powder Recovery Typical Outlet Air Temperature (°C) Key Selection Considerations
Milk and whey powders 50–150 High-efficiency cyclone followed by pulse-jet bag filter 90–96% 99.0–99.8% 98.9–99.9% 70–90 Control wall deposition, moisture pickup, and thermal exposure. A low-leakage discharge valve is important for maintaining recovery.
Starch and maltodextrin 40–120 Two-stage cyclone separation with downstream bag filter 88–95% 99.0–99.7% 98.1–99.7% 75–95 Fine particles can increase filter loading. Select antistatic filter media where dust explosibility and conductivity require it.
Fruit and vegetable powders 30–100 Sanitary cyclone with hygienic pulse-jet bag filter 85–93% 99.0–99.8% 97.7–99.6% 55–80 Hygienic cleanability, low product residence time, and humidity control are normally more critical than maximum gas throughput.
Plant proteins 50–180 High-capacity cyclone plus low-pressure-drop bag filter 88–95% 99.0–99.7% 98.1–99.7% 65–90 Protein powders may be cohesive and difficult to discharge. Review filter differential pressure, conveying velocity, and powder temperature.
Pharmaceutical or nutraceutical powders 10–80 Contained cyclone followed by validated high-efficiency bag filtration 75–90% 99.5–99.9% 98.1–99.9% 45–75 Containment, validated cleaning, material compatibility, and controlled dust exposure may govern the design more than cyclone efficiency.
Enzyme and heat-sensitive powders 20–100 Low-temperature open cycle with cyclone and fine-particle bag filter 82–92% 99.2–99.8% 98.4–99.6% 40–70 Use short residence time, precise temperature control, and moisture monitoring. Avoid excessive pulse cleaning that can damage fragile agglomerates.
Mineral and ceramic suspensions 20–150 Wear-resistant cyclone with abrasion-resistant bag-filter components 90–98% 98.5–99.7% 98.7–99.9% 80–120 Check abrasion allowance, cyclone inlet velocity, grounding, and filter-media resistance. Dense particles generally separate more easily than low-density organic powders.

Evaluation basis: Overall recovery is estimated from the relationship 1 − [(1 − cyclone recovery) × (1 − bag-filter capture)]. The ranges are representative engineering values for a properly balanced open-cycle spray-drying system and are not guaranteed performance specifications. Actual results depend on feed solids, particle-size distribution, bulk density, inlet and outlet temperatures, gas flow, humidity, filter leakage, powder discharge losses, and operating stability.

For global sourcing, request a witnessed acceptance test using the actual feed formulation, with powder mass balance, cyclone differential pressure, bag-filter differential pressure, exhaust dust concentration, moisture content, and cleaning-cycle data recorded under steady-state operation.

Verify ATEX, NFPA, and IECEx Compliance for Combustible Powder Hazards

Choosing a Production Spray Dryer for global sourcing requires more than comparing capacity, energy use, and delivery time. Combustible powder hazards must guide the selection from the first technical meeting. An open-cycle dryer can release dust into process air, especially near the chamber outlet and cyclone. Small leaks matter.

Verify ATEX requirements for equipment placed in European markets. Check equipment category, zoning assumptions, ignition protection, and technical documentation. For North American projects, review NFPA guidance for dust hazards, explosion venting, suppression, grounding, and housekeeping. IECEx certification can support international procurement, but it does not replace local approval. The certificate must match the actual motor, sensor, enclosure, and installation conditions. A familiar-looking document may still be incomplete.

Tips: Ask for a complete conformity file, not only a certificate. Request dust explosibility data, including Kst and Pmax, from a qualified laboratory. Confirm whether the dryer uses inerting, isolation valves, or explosion relief panels. Inspect the powder-contact areas for grounding continuity. Leave room for honest review. Supplier drawings sometimes omit a small transfer line or filter, yet that section may carry the highest dust risk. Have an independent safety engineer compare the proposal with the destination country’s rules before purchase.

Audit Global Suppliers by Energy Use, Lead Time, Service, and Validation Data

Choosing an open-cycle spray dryer globally requires more than comparing quotations. A Pressure Spray Dryer may look efficient on paper, yet operating data can reveal costly gaps. Ask suppliers for energy consumption per kilogram of evaporated water, tested with a defined feed and inlet temperature. Request utility assumptions, not rounded estimates. During a factory audit, inspect steam lines, insulation, air filters, and control cabinets. A warm pipe or frequent filter change can signal hidden consumption.

Lead time should be verified against production evidence. Review recent delivery records, fabrication capacity, and the longest-lead components. A supplier promising eight weeks needs a realistic drawing-approval schedule. Check whether installation support includes commissioning, operator training, and remote troubleshooting. Service quality becomes visible when a technical question receives a precise answer within one working day. Ask for spare-parts lists, response windows, and escalation contacts. Do not accept “global service” without named coverage hours.

Validation data should be traceable, current, and relevant to your product. Examine moisture results, particle-size distribution, yield, wall deposition, and cleaning records from comparable trials. Confirm instrument calibration and test methods. If the supplier shares only a polished performance chart, ask for raw readings and deviations. That request may expose uncertainty, but uncertainty is useful before purchase. I would also document every assumption in the audit report. We once treated a short lead time as a strength; later, missing validation work delayed the project. Supplier scoring should leave room for such lessons.

Pneumatic Spray Dryer: Efficient Solutions for Advanced Powder Production and Industrial Processing

Pneumatic Spray Dryer: Efficient Solutions for Advanced Powder Production and Industrial Processing

Pneumatic spray drying uses compressed air or steam traveling at approximately 200–340 m/s. At the nozzle, the gas mixes with the feed liquid, and the velocity difference creates intense shear that breaks the liquid into fine droplets. Rapid heat and mass transfer then produces powders with controlled particle size and low moisture content. This operating principle is especially valuable for small flow rates, ultrafine powders, and materials that require gentle thermal treatment.

According to recent market assessments from MarketsandMarkets, the global spray-drying equipment sector is expected to maintain a mid-single-digit annual growth rate through the decade, supported by demand from pharmaceutical, food, chemical, and advanced-material applications. Pneumatic systems complement this trend by offering flexible operation for laboratory research, process development, and small-batch manufacturing. Their compact atomization approach can support precise formulation trials while reducing material consumption during development.

Typical applications include pharmaceutical active ingredients and intermediates, essences and fragrances, plant extracts, catalysts, ultrafine ceramic powders, specialty chemicals, and other heat-sensitive materials. With suitable control of feed concentration, gas pressure, inlet temperature, and outlet temperature, the process can help engineers optimize powder morphology, flowability, residual moisture, and recovery rate for demanding industrial processing.

FAQS

What is an open-cycle spray dryer?

It draws fresh air, heats it, and exhausts the air after drying. The process needs effective filtration and ventilation.

How do airflow patterns affect product quality?

Co-current airflow exposes droplets to hot air first, helping protect heat-sensitive materials. Counter-current airflow may improve efficiency but increase thermal exposure.

Which feed types require special equipment choices?

Solutions usually atomize easily. Suspensions need suitable nozzles and continuous agitation. Emulsions may require wider passages to reduce blockage.

Why does droplet size matter during spray drying?

Small droplets dry quickly and may create more dust. Larger droplets can dry slowly and retain more moisture. Small details matter.

What inlet and outlet temperatures are commonly compared?

Inlet temperatures may range from 150°C to 250°C. Outlet temperatures often range from 60°C to 100°C.

Is a higher inlet temperature always better?

No. A 230°C inlet may shorten drying time but cause darker particles, cracks, or aroma loss. A 190°C inlet with an 80°C outlet may perform better.

What should buyers request during equipment evaluation?

Request written control ranges, sensor locations, calibration records, and comparable feed test results. Do not rely on maximum temperature claims alone.

How should solvent-containing feeds be assessed?

Review solvent compatibility, exhaust concentration testing, ignition-source controls, ventilation, and cleaning validation. Airflow alone cannot prove safety.

Why is a pilot run useful before global sourcing?

A pilot run reveals changes caused by viscosity, humidity, feed rate, and droplet size. Supplier documents may hide feed variability. Test it.

Which results should be checked after drying trials?

Check residual moisture, bulk density, particle size, powder appearance, and outlet-temperature response. Results may change between regions and seasons.

Conclusion

Choosing a Spray Dryer Open Cycle for global sourcing requires a clear understanding of process needs, safety requirements, and supplier capabilities. Start by defining the airflow arrangement, feed characteristics, and acceptable solvent limits. Capacity should match the expected evaporation load, ranging from approximately 5 to 10,000 kg of water per hour. Inlet temperatures commonly fall between 150 and 250°C, while outlet temperatures should be carefully controlled within about 60–100°C to protect product quality and maintain consistent moisture levels.

A reliable system should achieve powder recovery above 95% through properly designed cyclones, bag filters, or combined separation stages. For combustible powders, suppliers must provide documented compliance with applicable ATEX, NFPA, and IECEx requirements, along with suitable risk assessments and protective measures. During global supplier evaluation, compare energy consumption, production lead time, technical service, spare-parts support, commissioning capability, and validation data. A transparent review of these factors helps buyers select a safe, efficient, and maintainable spray-drying solution for long-term operation.

Gabriel

Gabriel

Gabriel is a seasoned marketing professional at Longly Intelligent, a pioneering enterprise established in 2002 that specializes in the research, development, production, sales, and services of innovative intelligent equipment. With over two decades of experience in technology R&D, Gabriel......
Previous How to Optimize a High Speed Disperser Process?